The release of VISION™ 22.214.171.124 adds a 3D viewer for spectral data (Figure 1). This allows for data across multiple wavelengths to be viewed simultaneously when performing experiments with a UV-visible photodiode-array detector (DAD or PDA), variable-wavelength detector (VWD), and/or fluorescence detector (FLD). Combined with Wyatt’s Eclipse FFF systems, the VISION software hub provides both convenience and an array of functionality, including VISION DESIGN (or SCOUT™ for legacy software) for FFF method development and analysis as well as VISION RUN (or VOYAGER™ for legacy software) for instrument control of Agilent or Shimadzu HPLC hardware.
DADs and PDAs allow for continuous acquisition of different UV wavelengths at the same time. On the other hand, VWDs and FLDs can scan a wavelength range in order to acquire spectral data. VISION can digitally read data from both collection strategies to generate 3D plots. This allows for a quick inspection of several data streams and the ability to gauge the appropriate UV or FLD wavelengths for analysis.
To collect data, the detector method in VOYAGER should include the appropriate configuration. Please see Figure 2 below for Agilent method settings.
For Shimadzu PDAs, collection options including scan range and steps can be configured under ‘3D data acquisition settings’ shown in Figure 3.
Viewing Spectral Data
VOYAGER will then generate a corresponding SCOUT data file with each experiment run, that will include a Spectrum View node for those data. The spectral data for a collection can be found under the experiment header, as shown in Figure 4.
3D Spectral View
Once selected, the 3D Spectral View will be provided in the right-side window and the 2D graph showing the detector signal versus time will be displayed on the left. This layout is shown in Figure 5.
To control and change the view of your spectral data:
If you would like to use the spectral data in a report, the clipboard icon at the upper right can be left- or right-clicked to copy the image of the current graph showing absorbance versus wavelength and time. Pressing CTRL + C will copy both the graph and the callout. The table data can also be copied, and saved as a .csv file.